Visualizing Pavement Distress–The Complete Story of Pavement Inspection

Pavement management incorporates data collected utilizing various methods to gain a complete view of how the pavement is performing through its life-cycle.  One of the most common practices in pavement inspection is imaging utilizing high-resolution cameras mounted on vehicles outfitted with precision GPS and inertial navigation.  This imaging, when combined with laser profiling, constitutes a typical pavement inspection setup utilized by many DOTs as well as Local government agencies.

image

Pavement Inspections tend to follow a process that in many cases is proprietary and “black box” in nature.  This makes it hard for the purchasing agency to see how their roads were inspected and how the resulting pavement condition scores were generated.  Our team of Engineers and GIS professionals have worked hard to develop a process to remove the “black box” related pavement inspection and to make it easy and simple to trace inspection results back to their originating distresses from the field.

First, our entire process is geospatial in nature from the get-go.  Our van’s location is tracked in six-dimensions in real-time and this information is used to calculate the exact location of pavement cracks in the resulting images.  Next, the pavement images are geospatially referenced in 3-d and 1mm-pixel resolution, making it easy to extract low-severity cracks in a true 3-d environment.  This process then allows us to create GIS vectors (points, lines and polygons) of each distress for each pavement image and deliver them to our clients as part of the pavement inspection deliverables.

imageimage

This is a crucial piece to the pavement inspection “story” because it shows the purchasing agency exactly what distresses were identified and measured when creating the pavement condition scores for a section of road.  Being able to see these distresses on a map helps to complete the story by providing the ability for a rigorous QA/QC process utilizing some simple GIS tools.

Each Section of road can be colored by the condition score and its range of values.  This tells one component of its story.  The underlying distress information tells the rest of the story related to “How” a section of road was scored and assigned its inspection score.  By having this information at their fingertips, pavement inspection personnel have a GIS-centric and user-friendly tool that allows them to QA/QC pavement inspection data efficiently.

image

 

 

Automated Pavement Distress Analysis – The Final Frontier?

 We have been working with some automated methods for quantifying crack measurements and have had some interesting results.  How great would it be to collect pavement images, batch them on a server and have it spit out accurate crack maps that you can overlay in a GIS?  The technology is here!  Or, is it?

Most pavement inspections involve intricate processes where pavement experts rate segments visually, either from field visits or rating pavement images in the office.  This introduces a lot of subjectivity in the rating results and typically culminates in a spreadsheet showing pavement ratings by segment.  The data is then modeled using ASTM performance curves that have been built from industry proven pavement experiments.

There is no doubt that these curves are tried and true representations of how pavement performs in varying physical and environmental conditions and each project should take these factors into consideration when developing the preservation plans for an agency.

We have been working to develop a rating workflow that focuses on a combination of automated and manual processes to bridge the current gap of Quantitative and Qualitative pavement inspections.  The way we are doing this is through the application of GIS to the automated rating process.  Here’s how it works…

First, we begin with a pavement image from our LRIS pavement imaging system.  Images are captured at a 1mm-pixel resolution and then analyzed through an automated image processing workflow.

image

The resulting image creates a “crack map” that identifies the type, severity and extent of the distresses on that section of pavement.  The process is fully automated and handled by the computer.

image

Once we have the crack maps in place, we then apply a manual editing process that is GIS-centric by nature and the resulting crack map is a more accurate representation of the real-world conditions.

image

Once the edited crack maps are compiled, the data is exported to a GIS where the extents are calculated geospatially and then integrated with a pavement management system.  This is where all of the Pavement Condition Indices (PCI) are calculated and applied to each agency’s specific pavement rating methodologies.  Since the process is geospatial in nature, it is easily imported to ANY pavement management software and gives our clients the flexibility to apply any rating methodology they desire.

image

Of course, all agencies have a certain spending threshold and there are cases where automation is the only way to cost-effectively manage large volumes of data.  We recognize this fact and are working hard to bridge the gap of available funding and high quality data.

Mobile LiDAR and Cross-Slope Analysis

DTS/EarthEye just completed a 9-mile mobile LiDAR scan of I-95 here in Florida and provided one of our partners with cross-slope information in a period of days.   The data was collected with our buddies at Riegl USA using their VMX-250 mobile LiDAR.  This information will be used to generate pavement resurfacing plans for the Florida Department of Transportation (FDOT).

This project shows the value that this type of project can provide to the end user on both sides of the fence.

First, the paving contractor can use this data to develop their 30% plans for submittal to FDOT when bidding on a resurfacing or re-design contract.  Having accurate and relevant data related to the roadway’s characteristics gives the paving contractor an edge over the competition because they know what the field conditions are before preparing an over-engineered design specification.  This happens all of the time because the detailed field conditions are unknown while they are preparing their plans and they only have historical information to work from.

On the other side of the fence resides the FDOT.  They can benefit from this information because if they can provide this detailed information as part of a bid package, they can reap the benefits that are gained from better information.  If all contractors have the detailed as-built information (or in this case, accurate cross-slopes), they can all prepare their submittals using the same base information.  This will provide the FDOT project manager with more accurate responses based on true field conditions, resulting in more aggressive pricing and decreased project costs.

Here are some screenshots of the information.

image

LiDAR Data Viewed by Intensity and Corresponding Cross-Slope Profile

Once the data has been collected and calibrated, we generate cross-slopes at a defined interval and export those out as 3D vectors.

image

These vectors are then symbolized based on their cross-slope percentages and exported as a KML file for ease of use.

image

Although this is a pretty simple step, the presentation of the data in Google Earth makes it easy for the end-user to visually identify problem areas and design the corrective actions according to field measurements.

image

Airborne LiDAR Update

We are operational!

Aircraft – Check!

LiDAR – Check!

Aerial Photography Camera – Check!

Hyperspectral Camera – Check!

Avalon Park LiDAR

LiDAR Data Colored by Elevation

We’re operational and have a ton of data in the can and ready for processing.  Our data sets include samples from residential communities to transmission powerlines to unmentionable clients who have some interesting needs!  One of the biggest hurdles has been developing our own viewing software that we can deliver with these large datasets so that our clients can manage their deliverables.  The goal is to build a piece of software that is lightweight and easy to maintain code-wise, while building tools that clients can use to streamline their business processes.

3"-pixel Aerial Photography

Keep watching here for data samples and updates to our software!

Pavement Camera Update

We’re finishing up on the City of Charlotte’s pilot pavement data collection project.  To date, we have collected Mobile LiDAR, Mobile Video, Ground-Penetrating Radar, Roughness and Rutting data for a 50-mile pilot area.  This was the first go-around for our pavement camera and the results were great.

Downward-Facing Pavement Camera

Pavement Cam

What’s cool about this is that we can now get a great view of the lane of travel and see the low density cracking because we’re basically collecting 2mm pixels.  We’re working on learning how to orthorectify these images so they can be fused with the point cloud to give a real-world representation of the pavement surface that can be viewed in 3d.